CAT1320LI-25-G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The mount is provided by Through Hole. In total, the power management has 8 pins in it. Pin count of the power management is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 3mA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A similar IC managements number of the manufacturer can always be found by using CAT1320, the base power ics number. Voltage supervisor can work with a supply temperature of 3mA at the most.
CAT1320LI-25-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1320LI-25-G Applications
There are a lot of ON Semiconductor CAT1320LI-25-G Voltage Supervisors applications.
- Battery-powered equipment
- WiFi router
- Kitchen appliances
- Automotive permanent magnet synchronous motors
- Detection of phase loss
- Electric heating appliances
- Electronics installed in the vehicle
- Utility meter
- Sensitive sensors
- Power distribution systems of operating room
