CAT130019TWI-GT3 Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When 3.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. A total of 8 pins are located on this power management. 8 pins are present on the power management system. IC management can only work with a supply voltage of 2.5V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 3mA. You can always use CAT13001, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3mA can be used with this power management.
CAT130019TWI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.5V
3mA operating supply current
CAT130019TWI-GT3 Applications
There are a lot of ON Semiconductor CAT130019TWI-GT3 Voltage Supervisors applications.
- Satellite navigation
- Fire equipment power monitoring system
- Detection of phase loss
- Personal computers
- Telecommunications equipment
- Detection of phase sequence
- Power distribution systems of CCU
- Stable power system
- Important electronics for automotive protection
- emergency room
