CAT1163WI-25-T3 Overview
As you can see, this power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3V supply voltages. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. In total, it has 8 pins on IC management. 8 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 3mA. The maximum supply temperature is 3mA.
CAT1163WI-25-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1163WI-25-T3 Applications
There are a lot of ON Semiconductor CAT1163WI-25-T3 Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Battery cars
- Detection of phase imbalance
- Unattended substation automation
- DSP
- Stable power system
- Automotive permanent magnet synchronous motors
- Analog circuit
- Urban rail transit weak current power monitoring
- Detection of phase sequence
