CAT1026LI-42-G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 2 channels that can be found. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. In a 5V supply voltage, the power management conducts. IC management conducts in a 2-voltage supply. The mount is provided by Through Hole. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 2.7V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The power management's supply current is 3mA. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by CAT1026. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.
CAT1026LI-42-G Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1026LI-42-G Applications
There are a lot of ON Semiconductor CAT1026LI-42-G Voltage Supervisors applications.
- Battery-powered equipment
- Computer applications
- Power distribution systems of ICU
- Power communication system
- emergency room
- Smart meter
- Fire equipment power monitoring system
- Insulation fault location system
- Medical-specific insulation monitor
- Efficient information transmission
