CAT1025WI-28-GT3 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. In total, IC powers are 8 pins on the board. This power management has 8 pins. It is recommended that Vsup should not be less than 2.7V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 3mA. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to CAT1025, the base PMIC number. A maximum supply temperature of 3mA can be used.
CAT1025WI-28-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1025WI-28-GT3 Applications
There are a lot of ON Semiconductor CAT1025WI-28-GT3 Voltage Supervisors applications.
- Electrical fire monitoring system
- Electric heating appliances
- Digitally controlled LDO regulators circuit
- Transformer load monitoring equipment
- Efficient information transmission
- Set top box
- Microcontroller system
- Cloud computing
- Leakage protection
- Unattended substation automation
