CAT1025LI25 Overview
Power management is mounted through 8 terminals. Packaged in the form of a Tube, power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. Through Hole is the one that mounts power management. It has a total of 8 pins that are attached to IC management. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 3V volts. The recommended mounting type for IC management is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 3mA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.625V; MANUAL RESET INPUT to name a few.
CAT1025LI25 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
3mA operating supply current
CAT1025LI25 Applications
There are a lot of ON Semiconductor CAT1025LI25 Voltage Supervisors applications.
- Battery cars
- Radar
- Fire equipment power monitoring system
- Battery-powered equipment
- Sensitive sensors
- Military communications
- Refrigeration
- Electronics installed in the vehicle
- Personal computers
- Household appliances
