CAT1025LI-30-G Overview
A total of 8 terminals are used to mount this power management. Power management is packaged in a Tube way. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 3.3V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Through Hole is the one that mounts power management. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 2.7V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Through Hole is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a 3mA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. You can always use CAT1025, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3mA can be used.
CAT1025LI-30-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1025LI-30-G Applications
There are a lot of ON Semiconductor CAT1025LI-30-G Voltage Supervisors applications.
- Detection of phase sequence
- Urban rail transit weak current power monitoring
- Leakage protection
- Precision measurement
- Dash board
- Power distribution systems of operating room
- Medical-specific insulation monitor
- Important electronics for automotive safety
- Cloud computing
- Microcontroller system
