CAT1022WI-42-GT3 Overview
It is mounted through 8 terminals on the power management. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power management has a total of 8 pins. This power management has 8 pins. Supply voltage (Vsup) should be at least -2V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 10μA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 4.375V; MANUAL RESET INPUT to name a few. It is always advisable to use CAT1022, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 3mA.
CAT1022WI-42-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
10μA operating supply current
CAT1022WI-42-GT3 Applications
There are a lot of ON Semiconductor CAT1022WI-42-GT3 Voltage Supervisors applications.
- WiFi router
- Analog circuit
- Data storage applications
- Important electronics for automotive protection
- Detection of phase loss
- Telecommunications equipment
- Battery-powered equipment
- Digitally controlled LDO regulators circuit
- Embedded computing
- Magnetic resonance imaging
