CAT1022WI-30-GT3 Overview
There are 8 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 3.3V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -2V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 10μA is the recommended value. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use CAT1022, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.
CAT1022WI-30-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
10μA operating supply current
CAT1022WI-30-GT3 Applications
There are a lot of ON Semiconductor CAT1022WI-30-GT3 Voltage Supervisors applications.
- Detection of phase loss
- Radio
- Power communication system
- Sensitive sensors
- Multi-voltage system
- Consumer electronics
- Functional modules
- Solar power charger
- Important electronics for automotive protection
- Battery cars
