BAT54SLT1G Overview
When the forward voltage is set to 800mV, this device will operate.A maximum output voltage of 0.2A is supported by array.As a general rule, surge currents should be monitored and kept below 600mA.There will be no operation of this device when the forward voltage is set to 200mA.The part can draw a current of 200mA.The device is capacitance-limited to approximately 10pF farads.Array is powered by a reverse voltage peak of 2μA.When reverse biased, its maximal reverse leakage current is 2μA, which is the current flowing from that semiconductor device.Electronics and electrical devices create heat as a byproduct of their primary action.
BAT54SLT1G Features
800mV forward voltage
a maximum output voltage of 0.2A
10pF farads
a peak voltage of 2μA
a reverse voltage peak of 2μA
BAT54SLT1G Applications
There are a lot of ON Semiconductor BAT54SLT1G applications of rectifier diode array.
- Battery chargers
- Rectifier for drives applications
- Rectifiers in switch mode power supplies (SMPS)
- Rectifiers for UBS
- Free wheeling diode in low voltage converters
- Crowbar applications
- General Rectification
