BAT54AWT1G Overview
In this case, the forward voltage has to be set at 800mV to operate the device.An output voltage of 0.1A is the maximum it can handle.As a general rule, surge currents should be monitored and kept below 600mA.A forward voltage of 200mA will enable the device to operate.Using the part, you can draw a current of 200mA.Array is powered by a reverse voltage peak of 2μA.A semiconductor device's maximum reverse leakage current is 2μA, which is the current created by its reverse bias.This electronic or electrical device creates 200mW of heat (energy loss) as a derivative of its primary action.
BAT54AWT1G Features
800mV forward voltage
a maximum output voltage of 0.1A
a peak voltage of 2μA
a reverse voltage peak of 2μA
BAT54AWT1G Applications
There are a lot of ON Semiconductor BAT54AWT1G applications of rectifier diode array.
- Battery chargers
- Free wheeling diode in low voltage converters
- General Rectification
- Rectifiers for UBS
- Rectifier for drives applications
- Crowbar applications
- Rectifiers in switch mode power supplies (SMPS)
