74LVX74MX Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. There is a Differentialoutput configured with it. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74LVXseries comprises this type of FPGA. Its output frequency should not exceed 85MHz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74LVX74 family. The power source is powered by 2.7V. This JK flip flop has a 4pFfarad input capacitance. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. It is mounted in the way of Surface Mount. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. Vsup reaches 3.6V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. It has 4lines. There is a consumption of 2μAof quiescent current from it. There are 2 channels available.
74LVX74MX Features
Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies
74LVX74MX Applications
There are a lot of ON Semiconductor 74LVX74MX Flip Flops applications.
- Storage registers
- Storage Registers
- ESD protection
- Single Down Count-Control Line
- Digital electronics systems
- Frequency Dividers
- Buffered Clock
- Buffer registers
- Divide a clock signal by 2 or 4
- Reduced system switching noise
