74LVTH374MTCX Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A 2.7V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74LVTHseries of FPGAs. There should be no greater frequency than 160MHzon its output. In total, there are 1 elements. 20terminations have occurred. You can search similar parts based on 74LVTH374. A voltage of 3.3V is used to power it. This T flip flop has a capacitance of 3pF farads at the input. LVTis the family of this D flip flop. Surface Mount mounts this electronic component. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 8bits are used in its design. Keeping the supply voltage (Vsup) above 2.7V is necessary for normal operation. Using 8 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 3.3V. It is designed with 3 output lines. As a result, it consumes 190μA of quiescent current without being affected by external factors.
74LVTH374MTCX Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
74LVTH374MTCX Applications
There are a lot of ON Semiconductor 74LVTH374MTCX Flip Flops applications.
- QML qualified product
- Patented noise
- Shift Registers
- Parallel data storage
- Registers
- Balanced Propagation Delays
- Circuit Design
- Differential Individual
- Data storage
- Power down protection
