74LVT574MSAX Overview
The package is in the form of 20-SSOP (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. It is configured with Tri-State, Non-Invertedas an output. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2.7V~3.6Vis required for its operation. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LVT series. Its output frequency should not exceed 150MHz Hz. D latch consists of 1 elements. T flip flop consumes 190μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74LVT574 family. The power supply voltage is 3.3V. This T flip flop has a capacitance of 4pF farads at the input. The electronic device belongs to the LVTfamily. Vsup reaches its maximum value at 3.6V. Normally, the supply voltage (Vsup) should be above 2.7V. This D flip flop is equipped with 0 ports.
74LVT574MSAX Features
Tape & Reel (TR) package
74LVT series
74LVT574MSAX Applications
There are a lot of ON Semiconductor 74LVT574MSAX Flip Flops applications.
- Divide a clock signal by 2 or 4
- Synchronous counter
- Dynamic threshold performance
- Guaranteed simultaneous switching noise level
- Pattern generators
- Set-reset capability
- High Performance Logic for test systems
- Data Synchronizers
- EMI reduction circuitry
- Bus hold
