74LVQ174SCX Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. This output is configured with Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74LVQ series. This D flip flop should not have a frequency greater than 100MHz. A total of 1elements are contained within it. T flip flop consumes 40μA quiescent energy. The 74LVQ174 family contains it. There is 4.5pF input capacitance for this T flip flop. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. It has a clock edge trigger type of Positive Edge. There are 6bits in this flip flop. 7 circuits are used to achieve its superior flexibility. In order to operate, the chip has 6 output lines. The number of input lines is 3. High level output current is set to -12mA. There is 12mA output current at the low level. A temperature below 85°Cis recommended for operation. Ideally, the operating temperature should be higher than -40°C. The minimal supply voltage is 2V. The maximum supply voltage supported by the flip flop is 3.6V. It is possible to achieve 100MHz frequencies.
74LVQ174SCX Features
Tape & Reel (TR) package
74LVQ series
16 pins
6 Bits
74LVQ174SCX Applications
There are a lot of ON Semiconductor 74LVQ174SCX Flip Flops applications.
- Test & Measurement
- Counters
- Convert a momentary switch to a toggle switch
- Shift Registers
- Bus hold
- Computers
- Power down protection
- Cold spare funcion
- Matched Rise and Fall
- EMI reduction circuitry
