74LCX374WM Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tube, it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~3.6Vis used as the supply voltage. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74LCXseries contain this type of chip. You should not exceed 150MHzin its output frequency. In total, there are 1 elements. A total of 20terminations have been recorded. The object belongs to the 74LCX374 family. The D flip flop is powered by a voltage of 2.5V . The input capacitance of this JK flip flopis 7pF farads. LVC/LCX/Zis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The flip flop is designed with 8bits. Normally, the supply voltage (Vsup) should be above 2V. Its flexibility is enhanced by 8 circuits. Due to its reliability, this T flip flop is well suited for RAIL. The flip flop has 2ports embedded within it. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 3output lines. It consumes 10μA current.
74LCX374WM Features
Tube package
74LCX series
20 pins
8 Bits
74LCX374WM Applications
There are a lot of ON Semiconductor 74LCX374WM Flip Flops applications.
- Clock pulse
- Storage Registers
- EMI reduction circuitry
- Reduced system switching noise
- ESCC
- 2 – Bit synchronous counter
- Frequency division
- Event Detectors
- ESD protection
- Balanced 24 mA output drivers
