74LCX162374MTDX Overview
The package is in the form of 48-TFSOP (0.240, 6.10mm Width). A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~3.6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74LCX series. In order for it to function properly, its output frequency should not exceed 170MHz. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74LCX162374. It is powered by a voltage of 2.5V . Input capacitance of this device is 7pF farads. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 48pins on it. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 16 Bits. Normally, the supply voltage (Vsup) should be above 2V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. In order for the chip to function, it has 3output lines. 2input lines are available for you to choose from. Despite external influences, it consumes 20μAof quiescent current.
74LCX162374MTDX Features
Tape & Reel (TR) package
74LCX series
48 pins
16 Bits
74LCX162374MTDX Applications
There are a lot of ON Semiconductor 74LCX162374MTDX Flip Flops applications.
- Communications
- Computing
- Synchronous counter
- Supports Live Insertion
- CMOS Process
- Data transfer
- Buffer registers
- Convert a momentary switch to a toggle switch
- QML qualified product
- High Performance Logic for test systems
