74ACTQ373SC Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Packaged in the way of Tube. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.5V~5.5V. It is -40°C~85°C at the operating temperature. 74ACTQ is the series number of this FPGA. The design of this electronic part contains 8 bits. 74ACTQ373 is the family name of it. This board has 20 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. There are electronic circuits attached to the 8 input lines. The supply voltage should be maintained at 5V for high efficiency. It follows that 3 output lines are generated from the binary equivalent of the input line. A total of 1 elements make up this object. The superior flexibility of this circuit can be attributed to the use of 8 circuits. There is 24mA output current at the low level. It has been set to -24mA for the high level output current. It is recommended to work at a temperature lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The maximum supply voltage is 5.5V. In order for the machine to operate, the supply voltage must be 4.5V.
74ACTQ373SC Features
20-SOIC (0.295, 7.50mm Width) package
74ACTQ series
8 Bits
74ACTQ373 family
20 pins
1 elements
74ACTQ373SC Applications
There are a lot of ON Semiconductor 74ACTQ373SC Latches applications.
- Shift Registers
- Automotive Cluster
- Serial Output Register
- Avionics
- Shift left with parallel loading
- Bus system register with enable parallel lines at bus side
- Automotive HEV/EV Powertrain
- Hammer
- Pattern Generators
- Shift left register
