74AC573PC Overview
20-DIP (0.300, 7.62mm) contains it. This package has the format of Tube. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Through Hole method. A voltage of 2V~6V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. Electronic parts with 8 bits are designed for this application. 74AC573 is the family name of it. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Through Hole. There are electronic circuits attached to the 2 input lines. Input lines are converted into binary equivalents by 3 output lines. The superior flexibility of the system is achieved through its use of 8 circuits. 24mA represents the low level output current. -24mA is set as the high level output current. A temperature below 85°C should be used for operation. It is recommended to operate at a temperature higher than -40°C. 6V is the maximum voltage it supports. With a voltage of 2V, it operates at its minimum capacity.
74AC573PC Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC573 family
20 pins
74AC573PC Applications
There are a lot of ON Semiconductor 74AC573PC Latches applications.
- Counter timers
- Buffer register
- Watches
- OC-48 communication systems
- Phase comparator
- Serial Output Register
- Flip-flops
- Shift right with parallel loading
- Parallel-to-Serial Data Conversion
- Buffer/Storage Registers
