74AC109SJ Overview
The item is packaged in 16-SOIC (0.209, 5.30mm Width)cases. The Tubepackage contains it. T flip flop uses Differentialas its output configuration. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~6Vis required for its operation. Temperature is set to -40°C~85°C TA. It belongs to the type JK Typeof flip flops. The 74ACseries comprises this type of FPGA. It should not exceed 175MHzin its output frequency. D latch consists of 2 elements. During its operation, it consumes 2μA quiescent energy. D latch belongs to the 74AC109 family. Its input capacitance is 4.5pFfarads. Surface Mount mounts this electronic component. With its 16pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 2bits. Despite its superior flexibility, it relies on 2 circuits to achieve it. There are no output lines on the JK flip flop. It has 5lines. The high level output current is set to -24mA. It is set to 24mAfor low level output current. A temperature below 85°Cshould be used for operation. Temperatures above -40°Cshould be used. It is powered by 2V as its minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. The frequency can be set to 175MHz.
74AC109SJ Features
Tube package
74AC series
16 pins
2 Bits
74AC109SJ Applications
There are a lot of ON Semiconductor 74AC109SJ Flip Flops applications.
- Parallel data storage
- Power down protection
- Common Clocks
- Communications
- Supports Live Insertion
- Load Control
- Safety Clamp
- Guaranteed simultaneous switching noise level
- Set-reset capability
- Pattern generators
