TDA8591J/N1,112 Overview
In the 27-SIP Formed Leads package, it is embedded.In this case, it is packaged as Tube .In addition, there are 27 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 4-Channel (Quad) is used as the output.This electrical device is classified as type Class AB .In this case, the electronic part is mounted in the way of Through Hole .There is 8V~18V voltage supply to this electrical device.4 channels are available on the device.Operating with Depop, Mute, Short-Circuit and Thermal Protection, Standby is possible.There are 27 pins on this device.Amp parts belongs to the TDA8591 family.A normal operation requires a supply voltage (Vsup) above 8V .In this case, the maximum supply voltage (Vsup) reaches 18V .Power is supplied by a 14.4V volt source.Supply currents are limited to 290mA .In order to operate properly, the temperature should be at least -40°C .Temperatures should not exceed 85°C .
TDA8591J/N1,112 Features
27-SIP Formed Leads package
27 pin count
TDA8591 family
TDA8591J/N1,112 Applications
There are a lot of NXP USA Inc.
TDA8591J/N1,112 audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
