TDA7052BT/N1,118 Overview
There is a device embedded in 8-SOIC (0.154, 3.90mm Width) .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is the output configured for it.The device is of type Class AB .Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 4.5V~18V volts.1 channels are present on the device.Operation can be ensured by Depop, Mute, Short-Circuit and Thermal Protection, Volume Control .A temperature greater than -40°C~85°C TA should not be used.There are 8 pins present on this device.This is a member of the TDA7052 family.To ensure normal operation, the supply voltage (Vsup) must be maintained above 4.5V .The maximum supply voltage (Vsup) is reached at 18V .The device is powered by a voltage of 6V volts.A maximum supply current of 13mA is achieved.
TDA7052BT/N1,118 Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TDA7052 family
TDA7052BT/N1,118 Applications
There are a lot of NXP USA Inc.
TDA7052BT/N1,118 audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment
