TDA1308/N2,112 Overview
The device is embedded in 8-DIP (0.300, 7.62mm) .There is a package in the form of Tube .In addition, 8 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Amp parts is configured to produce Headphones, 2-Channel (Stereo) as Amp partss output.Amp parts is an electrical device of type Class AB .The electronic component is mounted in the way of Through Hole .This electrical device operates at 3V~7V ±1.5V~3.5V volts.This device is equipped with a total of 2 channels.During operation, Depop, Short-Circuit Protection can be ensured.During operation, the temperature should not exceed -40°C~85°C TA .A total of 8 pins are present on the device.Amp parts is a member of the TDA1308 family.During normal operation, the supply voltage (Vsup) should remain above 1.5V .Upon reaching 3.5V , the maximum supply voltage (Vsup) is reached.As a result, it operates on a 5V volt power supply.In this case, the maximum supply current is 5mA .There are additional features of IT CAN ALSO OPERATE WITH SINGLE 3V TO 7V SUPPLY on the chip.
TDA1308/N2,112 Features
8-DIP (0.300, 7.62mm) package
8 pin count
TDA1308 family
TDA1308/N2,112 Applications
There are a lot of NXP USA Inc.
TDA1308/N2,112 audio amplifiers applications.
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
