MKE06Z64VLD4 Description
MKE06Z64VLD4series microcontroller (MCU) provides the functions of the C28x core and CLA, and combines highly integrated control peripherals in low-pin devices. This series is compatible with previous c28x-based code and provides a high level of analog integration. The internal voltage regulator allows monorail operation. The HRPWM module is improved to realize double-edge control (frequency modulation). An analog comparator with an internal 10-bit reference voltage source is added, which can be directly routed to control the ePWM output. ADC can be converted from 0 to 3.3murV fixed full range and supports ratio metric VREFHI/VREFLO reference voltage source. The ADC interface has been optimized for low overhead and latency.
MKE06Z64VLD4 Features
? Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 105°C
? Performance
– Up to 48 MHz Arm? Cortex-M0+ core
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
? Memories and memory interfaces
– Up to 128 KB flash
– Up to 16 KB RAM
? Clocks
– Oscillator (OSC) - supports 32.768 kHz crystal or 4
MHz to 24 MHz crystal or ceramic resonator; choice
of low power or high gain oscillators
– Internal clock source (ICS) - internal FLL with
internal or external reference, 37.5 kHz pre-trimmed
internal reference for 48 MHz system clock
– Internal 1 kHz low-power oscillator (LPO)
? System peripherals
– Power management module (PMC) with three power
modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt,
selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module
(CRC)
– Serial wire debug interface (SWD)
– Aliased SRAM bitband region (BIT-BAND)
– Bit manipulation engine (BME)
MKE06Z64VLD4 Applications
low overhead and latency
