MK24FN1M0VLL12R Description
The MK24FN1M0VLL12R is a 120 MHz ARM? Cortex?-M4-based Microcontroller with FPU. The K24 product family members are designed for low-power, USB connectivity, and applications requiring up to 256 KB of embedded SRAM that are cost-sensitive. The extensive enablement and scalability of the Kinetis series are shared by these devices.
This item provides:
? Lower the power usage to 250 A/MHz. With full state retention and a 5-second awakening, static power consumption is as low as 5.8 A. Down to 339 nA in the lowest static mode
? USB LS/FS OTG 2.0 with an inbuilt 3.3 V, 120 mA LDO Vreg and crystal-free operation for USB devices
MK24FN1M0VLL12R Features
Communication interfaces
USB full-/low-speed On-the-Go controller
Controller Area Network (CAN) module
Three SPI modules
Three I2C modules. Support for up to 1 Mbit/s
Six UART modules
Secure Digital Host Controller (SDHC)
I2S module
Timers
Two 8-channel Flex-Timers (PWM/Motor control)
Two 2-channel FlexTimers (PWM/Quad decoder)
32-bit PITs and 16-bit low-power timers
Real-time clock
Programmable delay block
Clocks
3 to 32 MHz and 32 kHz crystal oscillator
PLL, FLL, and multiple internal oscillators
48 MHz Internal Reference Clock (IRC48M)
Operating Characteristics
Voltage range: 1.71 to 3.6 V
Flash write voltage range: 1.71 to 3.6 V
Temperature range (ambient): –40 to 105°C
Performance
Memories and memory interfaces
System peripherals
Multiple low-power modes, low-leakage wake-up unit
Memory protection unit with multi-master protection
16-channel DMA controller
External watchdog monitor and software watchdog
Security and integrity modules
Hardware CRC module
Hardware random-number generator
Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms
128-bit unique identification (ID) number per chip
Analog modules
MK24FN1M0VLL12R Applications
