MC9S08FL16CLC Description
The MC9S08FL16CLC is an 8-bit Cost-Effective FL16/8 MCUs. A microcontroller is a tiny computer on a single VLSI integrated circuit (IC) chip, often known as an MCU (microcontroller unit). One or more CPUs (processor cores), memory, and programmable input/output peripherals are all included in a microcontroller. Along with a tiny amount of RAM, on-chip program memory frequently also includes ferroelectric RAM, NOR flash, or OTP ROM. In contrast to the microprocessors used in personal computers or other general-purpose applications made up of numerous discrete chips, microcontrollers are intended for embedded applications.
MC9S08FL16CLC Features
Development Support
Single-wire background debug interface
Breakpoint capability to allow a single breakpoint setting during in-circuit debugging (plus two more breakpoints).
On-chip in-circuit emulator (ICE) debug module containing two comparators and nine trigger modes.
Peripherals
IPC — Interrupt priority controller to provide hardware based nested interrupt mechanism
ADC — 12-channel, 8-bit resolution; 2.5 μs conversion time; automatic compare function; 1.7 mV/°C temperature sensor; internal bandgap reference channel; operation in stop; optional hardware trigger; fully functional from 4.5 V to 5.5 V
TPM — One 4-channel and one 2-channel timer/pulse-width modulators (TPM) modules; selectable input capture, output compare, or buffered edge- or center-aligned PWM on each channel
MTIM16 — One 16-bit modulo timer with optional prescaler
SCI — One serial communications interface module with optional 13-bit break; LIN extensions
Input/Output
Package Options
8-Bit S08 Central Processor Unit (CPU)
Up to 20 MHz CPU at 4.5 V to 5.5 V across temperature range of –40 °C to 85 °C
HC08 instruction set with added BGND instruction
Support for up to 32 interrupt/reset sources
On-Chip Memory
Up to 16 KB flash read/program/erase over full operating voltage and temperature
Up to 1024-byte random-access memory (RAM)
Security circuitry to prevent unauthorized access to RAM and flash contents
Power-Saving Modes
Clock Source Options
Oscillator (XOSC) — Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 39.0625 kHz or 1 MHz to 16 MHz
Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies up to 10 MHz
System Protection
Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
Low-voltage detectionwith reset or interrupt; selectable trip points
Illegal opcode detection with reset
Illegal address detection with reset
Flash block protection
MC9S08FL16CLC Applications
Light sensing & controlling devices
Temperature sensing and controlling devices
Fire detection & safety devices
Industrial instrumentation devices
Process control devices
