FS32K118LAT0MLFT Description
The FS32K118LAT0MLFT MCU is a 32-bit AEC-Q100 approved MCU that combines a family of scalable Arm? Cortex?-M based microcontrollers with a full set of production-grade tools, providing up to ASIL B functional safety automotive and industrial applications.
The S32K1 MCUs have low-power operating modes, a cryptographic security engine with NXP firmware, and an automotive-grade Software Development Kit (SDK) with the FreeRTOS? OS. The S32K1 MCUs come in three different package types: QFN, LQFP, and MAPBGA.
FS32K118LAT0MLFT Features
– Low-power Arm Cortex-M4F/M0+ core with excellent energy efficiency
– Power Management Controller (PMC) with multiple power modes: HSRUN, RUN, STOP, VLPR, and VLPS. Note: CSEc (Security) or EEPROM writes/erase will trigger error flags in HSRUN mode (112MHz) because this use case is not allowed to execute simultaneously. The device will need to switch to RUN mode (80 MHz) to execute CSEc (Security) or EEPROM writes/erase.
– Clock gating and low power operation supported on specific peripherals.
– Up to 2 MB program flash memory with ECC
– 64 KB FlexNVM for data flash memory with ECC and EEPROM emulation. Note: CSEc (Security) or EEPROM writes/erase will trigger error flags in HSRUN mode (112 MHz) because this use case is not allowed to execute simultaneously. The device will need to switch to RUN mode (80 MHz) to execute CSEc (Security) or EEPROM writes/erase.
– Up to 256 KB SRAM with ECC
– Up to 4 KB of FlexRAM for use as SRAM or EEPROM emulation
– Up to 4 KB Code cache to minimize performance impact of memory access latencies
– QuadSPI with HyperBus? support
– Up to two 12-bit Analog-to-Digital Converter (ADC) with up to 32 channel analog inputs per module
– One Analog Comparator (CMP) with internal 8-bit Digital to Analog Converter (DAC)
– Serial Wire JTAG Debug Port (SWJ-DP) combines
– Debug Watchpoint and Trace (DWT)
– Instrumentation Trace Macrocell (ITM)
– Test Port Interface Unit (TPIU)
– Flash Patch and Breakpoint (FPB) Unit
– Voltage range: 2.7 V to 5.5 V
– Ambient temperature range: -40 °C to 105 °C for HSRUN mode, -40 °C to 150 °C for RUN mode
– Supports up to 112 MHz frequency (HSRUN mode) with 1.25 Dhrystone MIPS per MHz
– Arm Core based on the Armv7 Architecture and Thumb?-2 ISA
– Integrated Digital Signal Processor (DSP)
– Configurable Nested Vectored Interrupt Controller (NVIC)
– Single Precision Floating Point Unit (FPU)
– 4 - 40 MHz fast external oscillator (SOSC) with up to 50 MHz DC external square input clock in external clock mode
– 48 MHz Fast Internal RC oscillator (FIRC)
– 8 MHz Slow Internal RC oscillator (SIRC)
– 128 kHz Low Power Oscillator (LPO)
– Up to 112 MHz (HSRUN) System Phased Lock Loop (SPLL)
– Up to 20 MHz TCLK and 25 MHz SWD_CLK
– 32 kHz Real Time Counter external clock (RTC_CLKIN)
FS32K118LAT0MLFT Applications
Automotive
Active Suspension
Automotive Advanced Exterior Lighting
Automotive Zone Controller
Battery Management System (BMS)
Braking and Stability Control
Diesel Engine Management
Electric Pumps
Firmware Over-the-Air (FOTA)
Heating Ventilation, and Air Conditioning (HVAC)
Hybrid Electric Vehicle (HEV) Applications
Instrument Cluster
Motorcycle Engine Control Unit (ECU) and Small Engine Control
Transmission and Gearbox
Industrial
Avionics
Building Safety
Data Buses and Battery Management
Electricity Grid and Distribution
Gas Meter
Heat Metering
Industrial Control
Motor Drives
Smart Lighting
Smart Power Socket and Light Switch
Water Meter
Smart Home
Home Security and Surveillance
Major Home Appliances
Small and Medium Appliances
