74HCT273N,652 Overview
The package is in the form of 20-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. It is configured with Non-Invertedas an output. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. Its output frequency should not exceed 36MHz. In total, there are 1 elements. There is a consumption of 8μAof quiescent energy. There have been 20 terminations. Members of the 74HCT273family make up this object. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In terms of electronic devices, this device belongs to the HCTfamily of devices. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. In view of its reliability, this D flip flop is a good fit for BULK PACK. A power supply of 5Vis required to operate it.
74HCT273N,652 Features
Tube package
74HCT series
5V power supplies
74HCT273N,652 Applications
There are a lot of NXP USA Inc. 74HCT273N,652 Flip Flops applications.
- Matched Rise and Fall
- Safety Clamp
- Functionally equivalent to the MC10/100EL29
- Pattern generators
- Latch-up performance
- Frequency Divider circuits
- ESD protection
- Single Up Count-Control Line
- Load Control
- Data Synchronizers
