LPC810M021FN8FP Overview
The microprocessor is convenient for international shipping since it is packaged in DIP. uPs/uCs/Peripheral ICs are a MICROCONTROLLER, RISC. To date, there have been 8 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 3.3V. An architecture based on 32 bits is used. 30MHz is the CPU's frequency. Datasheets for 8 pin functions can be found here. To transfer data, there is a bandwidth of 32b. If the temperature is higher than 85°C, the microprocessor should not operate. A total of 8 pins are injected into the CPU microprocessor's body. This CPU is widely used in a variety of applications with its Through Hole mounting. It is expected that the CPU will reach a top frequency of 30MHz. It is possible to use the micro processor from 3.3V. It is designed with 0 RAM (Random-Access Memory). A voltage greater than 3.6V should not normally be applied to the embedded microprocessor. It is recommended to feed the CPU microprocessor with a voltage of 1.8V. By using 6 I/Os, CPU programs transfer data. Memory size on the CPU is 4kB. CPU activity is measured by the 3 counters. A total of I2C, POR peripheral devices are connected to the CPU. This CPU microprocessor has 6 programmable I/Os for I/O transfer. CPU microprocessors in the CORTEX-M0 family belong to this family.
LPC810M021FN8FP Features
32-Bit Structure
32b-Bit Data Bus Width
1kB RAM
6 I/Os
I2C, POR Peripherals
CORTEX-M0 CPU Family
LPC810M021FN8FP Applications
There are a lot of NXP Semiconductors / Freescale
LPC810M021FN8FP Microprocessor applications.
- Equipment control
- Instrument control
- Consumer electronics products
- Toys
- Robots
- Radio
- Television
- Heater/Fan
- Calculator
- Kindle
