Name: HEF4067BT,653
Brand: Nexperia USA Inc.
SKU: HEF4067BT,653
Price: 0.74000 USD
Availability: InStock

new-10%

HEF4067BT,653

Manufacturer part number:HEF4067BT,653

Manufacturer:Nexperia USA Inc.

Description:155Ohm Analog Switches 4067 24 Pins 200nA 15V 24-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:HEF4067BT,653 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.295, 7.50mm Width)
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Resistance	115Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	4067
Pin Count	24
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	15V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	80μA
Propagation Delay	50 ns
Turn On Delay Time	340 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	16
Supply Type	Dual
Bandwidth	70MHz
Turn-Off Delay Time	435 ns
On-State Resistance (Max)	155Ohm
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	7.5pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-50dB @ 1MHz
Voltage - Supply, Single (V+)	3V~15V
Drain to Source Resistance	175Ohm
Height Seated (Max)	2.65mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

HEF4067BT,653 Product Details

HEF4067BT,653 Overview

Due to its 24-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 24. The electronic part provides high-quality output because it has 16 channels. An 15V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 24 pins. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with 4067. An switch multiplexer with 115Ohm internal resistance has a value of 115Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 15V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual supply. A low voltage of 3V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 80μA current. Draining from a single voltage supply, this analog switch requires a voltage of 3V~15V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical component supports 16 inputs. There are 70MHz bandwidths for data transfer. Drain to Source resistance is 175Ohm.