Name: 74LVCV2G66DP,125
Brand: Nexperia USA Inc.
SKU: 74LVCV2G66DP,125
Availability: InStock

new-10%

74LVCV2G66DP,125

Manufacturer part number:74LVCV2G66DP,125

Manufacturer:Nexperia USA Inc.

Description:5ns, 9ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVCV2G66 8 Pins 10μA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:74LVCV2G66DP,125 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	10Ohm
Terminal Finish	NICKEL PALLADIUM GOLD
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74LVCV2G66
Pin Count	8
Operating Supply Voltage	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.3V
Analog IC - Other Type	POWER SUPPLY SUPPORT CIRCUIT
Operating Supply Current	40μA
Nominal Supply Current	100nA
Power Dissipation	250mW
Max Supply Current	40μA
Throw Configuration	SPST
Adjustable Threshold	NO
Turn On Delay Time	4.7 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	7.9 ns
-3db Bandwidth	210MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	10μA
Channel Capacitance (CS(off), CD(off))	8pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	5ns, 9ns
Charge Injection	0.0035pC
Crosstalk	-55dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	2.3V~5.5V
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
RoHS Status	RoHS Compliant

74LVCV2G66DP,125 Product Details

74LVCV2G66DP,125 Overview

Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 8 pins are injected into the electrical part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use 74LVCV2G66 to search for variants of the digital switches. This digital multiplexer has 10Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. There should be 2.3V voltage fed to the electrical part below 2.3V. This multiplexer would work with 40μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2.3V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 40μA. A POWER SUPPLY SUPPORT CIRCUIT analog IC is integrated into the board. There is a voltage range of 5V operating voltages for the electrical part. In order to operate the 2 inputs, there are several steps to follow.