74LVC823ADB,112 Overview
24-SSOP (0.209, 5.30mm Width)is the way it is packaged. The package Tubecontains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. A temperature of -40°C~125°C TAis used in the operation. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 200MHzin its output frequency. There are 1 elements in it. This process consumes 10μA quiescents. Currently, there are 24 terminations. D latch belongs to the 74LVC823 family. A voltage of 1.8V is used as the power supply for this D latch. Its input capacitance is 5pF farads. Electronic devices of this type belong to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. This board is designed with 24pins on it. A Positive Edgeclock edge trigger is used in this device. It is designed with 9bits. It reaches the maximum supply voltage (Vsup) at 3.6V. The D flip flop has no ports embedded. 9input lines are available for you to choose from. Quiescent current is consumed by the D latch in the amount of 100μA. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
74LVC823ADB,112 Features
Tube package
74LVC series
24 pins
9 Bits
74LVC823ADB,112 Applications
There are a lot of Nexperia USA Inc. 74LVC823ADB,112 Flip Flops applications.
- Synchronous counter
- Circuit Design
- Differential Individual
- Dynamic threshold performance
- Buffer registers
- Balanced Propagation Delays
- Guaranteed simultaneous switching noise level
- Computers
- EMI reduction circuitry
- Single Down Count-Control Line
