74LVC2G74GM,125 Overview
The flip flop is packaged in 8-XFQFN Exposed Pad. The Tape & Reel (TR)package contains it. Differentialis the output configured for it. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 1.65V~5.5V is required for operation. In the operating environment, the temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 200MHz. T flip flop consumes 40μA quiescent energy. There are 8 terminations,This D latch belongs to the family of 74LVC2G74. Power is provided by a 1.8V supply. This JK flip flop has a 4pFfarad input capacitance. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. The 8pins are designed into the board. This device has the clock edge trigger type of Positive Edge. There are 1bits in its design. Its superior flexibility is attributed to its use of 1 circuits. As a result, it consumes 100nA of quiescent current without being affected by external factors.
74LVC2G74GM,125 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
74LVC2G74GM,125 Applications
There are a lot of Nexperia USA Inc. 74LVC2G74GM,125 Flip Flops applications.
- Synchronous counter
- Memory
- Reduced system switching noise
- Parallel data storage
- Bounce elimination switch
- Storage registers
- Balanced 24 mA output drivers
- Buffered Clock
- Guaranteed simultaneous switching noise level
- Load Control
