74LVC2G53GS,115 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-XFDFN. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~125°C TA are extended for operation. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. An 2.7V voltage supply should allow the electrical part to be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SPDT switching circuits. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with 74LVC2G53. An switch multiplexer with 23Ohm internal resistance has a value of 23Ohm. To find out what the 8 pins do, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V.
74LVC2G53GS,115 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
74LVC2G53GS,115 Applications
There are a lot of Nexperia USA Inc. 74LVC2G53GS,115 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Isolation
- Fiber In The Loop (FITL)
- Microprocessor controlled systems
- Battery-powered systems
- PBX interfaces
- FTTH
- Data Acquisition Systems
- Ultrasound
- Video signal routing
