Name: 74LVC1G66GV,125
Brand: Nexperia USA Inc.
SKU: 74LVC1G66GV,125
Price: 0.47000 USD
Availability: InStock

new-10%

74LVC1G66GV,125

Manufacturer part number:74LVC1G66GV,125

Manufacturer:Nexperia USA Inc.

Description:4.2ns, 5ns SPST - NO 10Ohm DUAL Analog Switches 74LVC1G66 5 Pins 5μA 2.7V SC-74A, SOT-753

Case Package:SOT-23

Datasheet:74LVC1G66GV,125 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
Resistance	15Ohm
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.7V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74LVC1G66
Pin Count	5
Operating Supply Voltage	5V
Polarity	Non-Inverting
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	200μA
Number of Ports	2
Nominal Supply Current	100nA
Power Dissipation	250mW
Max Supply Current	200μA
Number of Bits	1
Throw Configuration	SPST
Turn On Delay Time	5.3 ns
Family	LVC/LCX/Z
Number of Inputs	1
Output Characteristics	3-STATE
Supply Type	Single
Turn-Off Delay Time	4.2 ns
Logic IC Type	BUS DRIVER
-3db Bandwidth	500MHz
On-State Resistance (Max)	10Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	6.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	4.2ns, 5ns
Charge Injection	7.5pC
Voltage - Supply, Single (V+)	1.65V~5.5V
Length	2.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74LVC1G66GV,125 Product Details

74LVC1G66GV,125 Overview

Shipping overseas is convenient with the electronic component packed in SC-74A, SOT-753. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 5. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. The electronic part body is injected with 5 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with 74LVC1G66 if you're looking for variants. There is 15Ohm internal resistance in this digital multiplexer. For functions related to 5 pins, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 200μA current would be sufficient. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 200μA. 5V operating voltages are supported by the electronic component. It is possible to operate 1 inputs. It can conduct in a 1-bit manner.