Name: 74LVC1G66GF,132
Brand: Nexperia USA Inc.
SKU: 74LVC1G66GF,132
Availability: InStock

new-10%

74LVC1G66GF,132

Manufacturer part number:74LVC1G66GF,132

Manufacturer:Nexperia USA Inc.

Description:4.2ns, 5ns SPST - NO 10Ohm Analog Switches 74LVC1G66 6 Pins 5μA 2.7V 6-XFDFN

Case Package:SOT-23

Datasheet:74LVC1G66GF,132 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Mount	Surface Mount, Through Hole
Mounting Type	Surface Mount
Package / Case	6-XFDFN
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Resistance	240Ohm
Terminal Finish	Tin (Sn)
Max Power Dissipation	250mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.7V
Terminal Pitch	0.35mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	74LVC1G66
Pin Count	6
Operating Supply Voltage	5V
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1nA
Number of Ports	2
Nominal Supply Current	100mA
Max Supply Current	200μA
Number of Bits	1
Throw Configuration	SPST
Turn On Delay Time	5.3 ns
Family	LVC/LCX/Z
Output Characteristics	3-STATE
Supply Type	Dual, Single
Turn-Off Delay Time	4.2 ns
Output Polarity	TRUE
Logic IC Type	BUS DRIVER
-3db Bandwidth	500MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	6.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	4.2ns, 5ns
Charge Injection	7.5pC
Voltage - Supply, Single (V+)	1.65V~5.5V
Height Seated (Max)	0.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74LVC1G66GF,132 Product Details

74LVC1G66GF,132 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 6-XFDFN. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~125°C TA. In total, there have been 6 terminations. An 2.7V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 6 pins. A SPST - NO switching circuit is used for these analog switches. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with 74LVC1G66. This digital multiplexer has 240Ohm internal resistance. The functions of 6 pins can be found in the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. It is recommended to use 1.65V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 1nA. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 200μA on the multiplexer may cause damage. Operating voltages of 5V are compatible with the electrical part. 1-bit conductivity is possible.