74LVC1G53GS,115 Overview
Due to its 8-XFDFN packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operational temperature extended around -40°C~125°C TA. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. A total of 8 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. Circuits number 1 make up this analogue multiplexer. Try searching with 74LVC1G53 to find analog multiplexer variants. A 23Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply.
74LVC1G53GS,115 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
74LVC1G53GS,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G53GS,115 Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Cell phones
- Intelligent PBX
- FTTH
- ISDN NT1/TA
- Transmit
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SDH/SONET multiplexers
- Power routing
- SONET
