74LVC1G53DP,125 Overview
As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~125°C TA. 8 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. Into the electrical component body are injected 8 pins. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 1 circuits. Try searching with 74LVC1G53 if you're looking for variants. A 15Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.65V. In order to operate this switch device, it would need a current of 40μA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. This switch operates within the bandwidth of 300MHz. Drain to Source resistance is 7.5Ohm.
74LVC1G53DP,125 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 7.5Ohm
74LVC1G53DP,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G53DP,125 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Private Branch Exchange (PBX)
- Cable PC
- PCMCIA cards
- Avionics and Military Systems
- Audio/video switches
- Microprocessor Controlled Analog Systems
- Mechanical reed relay replacement
- CSU
- Battery-powered systems
