74LVC1G384GF,132 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-XFDFN. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. There are 6 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Search with 74LVC1G384 if you are looking for analog multiplexer variants. It has an internal resistance of 15Ohm. The functions of 6 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 200μA. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 200μA. There is a voltage range of 5V operating voltages for the electrical part. There are 1 inputs to be operated.
74LVC1G384GF,132 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GF,132 Applications
There are a lot of Nexperia USA Inc.
74LVC1G384GF,132 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
