Name: 74LV4052PW,112
Brand: Nexperia USA Inc.
SKU: 74LV4052PW,112
Availability: InStock

new-10%

74LV4052PW,112

Manufacturer part number:74LV4052PW,112

Manufacturer:Nexperia USA Inc.

Description:46ns, 32ns SP4T 85Ohm Analog Switches 74LV4052 16 Pins 2μA 6V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:74LV4052PW,112 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	135Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	400mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	6V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	74LV4052
Pin Count	16
Operating Supply Voltage	3.3V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	1V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80μA
Power Dissipation	400mW
Propagation Delay	8 ns
Turn On Delay Time	190 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Dual, Single
Bandwidth	200MHz
Turn-Off Delay Time	125 ns
On-State Resistance (Max)	85Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	46ns, 32ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-60dB @ 1MHz
Switch-on Time-Max	56ns
Voltage - Supply, Single (V+)	1V~6V
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

74LV4052PW,112 Product Details

74LV4052PW,112 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. When a voltage supply of 6V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SP4T switching circuit are built. A total of 2 circuits make up this switch device. Try searching for 74LV4052 variants of the analog switch ic. An switch multiplexer with 135Ohm internal resistance has a value of 135Ohm. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 1V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 80μA. Analogue multiplexers require a 1V~6V voltage to drain from a single voltage supply. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. This electrical part is compatible with 3.3V operating voltages. Operating the 8 inputs requires 8 inputs. 200MHz bandwidths enable data to be transferred.