Name: 74HCT4351D,112
Brand: Nexperia USA Inc.
SKU: 74HCT4351D,112
Availability: InStock

new-10%

74HCT4351D,112

Manufacturer part number:74HCT4351D,112

Manufacturer:Nexperia USA Inc.

Description:35ns, 23ns 120Ohm Analog Switches 74HCT4351 20 Pins 100nA 4.5V 20-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:74HCT4351D,112 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	160Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	74HCT4351
Pin Count	20
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	400nA
Power Dissipation	500mW
Propagation Delay	6 ns
Turn On Delay Time	75 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	170MHz
Turn-Off Delay Time	65 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	120Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	9Ohm
Switch Time (Ton, Toff) (Max)	35ns, 23ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Height Seated (Max)	2.65mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

74HCT4351D,112 Product Details

74HCT4351D,112 Overview

Shipping overseas is convenient due to the electrical component's packing in 20-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. Totally, there are 20 terminations. A high-quality output is provided by the electrical component's 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. A total of 20 pins are injected into the body of the electronic part. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HCT4351. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. For details about the functions of 20 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 4.5V. The analogue multiplexer could operate on 400nA current. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A voltage of 5V can be used to operate the electronic component. The data can be transferred over a wide range of bandwidths, called 170MHz bandwidths.