74HCT4066PW,112 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 14 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 14 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with 74HCT4066 if you are looking for analog multiplexer variants. It has an internal resistance of 35Ohm. The functions of 14 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 40μA. A voltage of 4.5V~5.5V is required to drain this analog switch from a single voltage supply. There is a voltage range of 5V operating voltages for the electrical part. There are 4 inputs to be operated.
74HCT4066PW,112 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz
74HCT4066PW,112 Applications
There are a lot of Nexperia USA Inc.
74HCT4066PW,112 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
