Name: 74HCT4052PW,118
Brand: Nexperia USA Inc.
SKU: 74HCT4052PW,118
Price: 0.60000 USD
Availability: InStock

new-10%

74HCT4052PW,118

Manufacturer part number:74HCT4052PW,118

Manufacturer:Nexperia USA Inc.

Description:60ns, 48ns SP4T 150Ohm Analog Switches 74HCT4052 16 Pins 2μA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:74HCT4052PW,118 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Propagation Delay	18 ns
Turn On Delay Time	105 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	9Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Number of Output Lines	10
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switch-on Time-Max	70ns
Switch-off Time-Max	50ns
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74HCT4052PW,118 Product Details

74HCT4052PW,118 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SP4T switching circuits. A total of 2 circuits make up this switch device. Search with 74HCT4052 if you are looking for analog multiplexer variants. It has an internal resistance of 210Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 320μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. There is a voltage range of 5V operating voltages for the electrical part. The transfer of data can be performed over 180MHz bandwidths.