74HC573DB,112 Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. It is packaged in the way of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~6V, it operates. During operation, the temperature is set at -40°C~125°C. 74HC is the series number of this FPGA. The design of this electronic part contains 8 bits. The family it belongs to is 74HC573. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. It consists of 10 input lines from which an electronic circuit can be built. High efficiency requires a voltage supply of 5V. 8 output lines provide binary equivalents of input lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. A total of 1 elements make up this object. 8 circuits enable it to achieve high performance. The low level output current is set to 7.8mA. In the high level output current, the value is set to -7.8mA. Lower than 125°C is the recommended operating temperature. The operating temperature should be higher than -40°C. The supply voltage is limited to 6V. In order for the machine to operate, the supply voltage must be 2V.
74HC573DB,112 Features
20-SSOP (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC573 family
20 pins
1 elements
74HC573DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC573DB,112 Latches applications.
- Shift left with parallel loading
- Automotive Body Electronics
- Motor Drives
- Serial Output Register
- Hammer
- Pattern generators
- Serial Output Data Queuing
- Display
- Parallel-to-Serial Data Conversion
- Ring counter
