74HC163DB,118 Overview
The device is packaged in the 16-SSOP (0.209, 5.30mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. As far as the device is concerned, there are 4bits of information. It is important to note that TCO OUTPUTare really important features of this electronic device. Further related parts may be found under the base part number 74HC163. To operate, the device requires a voltage of [0]. As low as 2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 6V (Vsup). There are 4 input lines that allow binary data to be input in the form of an on/off signal.
74HC163DB,118 Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
TCO OUTPUT
Operating supply voltage of 5V
74HC163DB,118 Applications
There are a lot of Nexperia USA Inc.
74HC163DB,118 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
