BL01RN1A1F1JDescription
A ferrite bead is also commonly called a ferrite clamp. It's a passive device that improves your PCB's power quality, designed to suppress high-frequency signals on a power-supply line. They're typically placed around a power supply / ground line pair that's incoming to a specific device.
BL01RN1A1F1JFeatures
Integrated Shielded Inducton Simple PCB Layout
Frequency Synchronization Input (650 kHz to 950 kH2)
Flexible Start-up Sequencing Using External Soft Start, Tracking and Precision Enable
Protection Against Inrush Currents and Faults such as Input uvLO and Output Short Circuit Junction Temperature Range --40°C to +125C
Single Exposed Pad and Standard Pinout for Easy Mounting and Manufacturing
Fast Transient Response for Powering FPGAs and ASICs
Fully Enabled for WEBENCH Power Designer Pin Compatible With
LMZ22005/LMZ23603/LMZ22003 Performance Benefits
-High Efficiency Reduces System Heat
Generation
-Tested to EN55022 Class B
-See SNVA473 and Lavout for Information
on Device Under Test
-Vin=24VVo=3.3Vlo=5A
BL01RN1A1F1JApplications
Point-of-load Conversions from 12-V and 24-V
Input Rail
Time-Critical Projects
Space Constrained
High Thermal RequirementApplications
