MPQ2451GT-5-AEC1-Z Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. A voltage regulator consists of 6 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a SOT-23-6 package to save space. There are 1 outputs on DC DC switching regulator. As you can see, this DC DC switching regulator generates Fixed output on its output pins. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. The switching frequency of this DC-DC switching regulator reaches 2.2MHz. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 12V. There is a possibility that DC DC switching regulator can give voltage at 900mV volts. To operate the voltage regulator 12v, 6 pins are required. As a general rule, this voltage regulator 12v should keep its output voltage at least at 5V. A 600mA A maximum output current is required to meet the switching regulator operation requirements. In the Automotive, AEC-Q100 family, this part palys an important role in DC DC switching regulator's traget applications. This DC-DC switching regulator operates from a supply voltage of 36V. The dc to dc voltage regulator's minimum supply voltage of 3.3V volts ensures reliable performance.
MPQ2451GT-5-AEC1-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 36V
MPQ2451GT-5-AEC1-Z Applications
There are a lot of Monolithic Power Systems Inc. MPQ2451GT-5-AEC1-Z Voltage Regulators applications.
- Hydro power
- Precision electronic equipment
- Experimental setup
- Elevator lighting
- Electrical distribution systems
- Correction machines
- Thermal power
- Machining centers
- Fire elevators
- Product testing
