MP7720DP-LF Overview
This package is embedded in 8-DIP (0.300, 7.62mm) .This device is packaged in the way of Tube .8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts uses 1-Channel (Mono) as the output.Class D is the type of this electrical device.Computers or other communication devices have 8 pins, which are pronged contacts.Amp parts is mounted in the way of Through Hole .There is 9.5V~24V supply voltage for this electrical device.Amp parts is equipped wAmp partsh 1 channels.When operating, it is possible to ensure Depop, Mute, Short-Circuit and Thermal Protection, Shutdown .Ideally, the operating temperature should not exceed -40°C~85°C TA .The device is equipped with 8 pins.There is an electronic component mounted in the way of Through Hole .A maximum output power of 20W kWh per hour can be achieved with this electronic part.Amp parts is recommended that the supply voltage (Vsup) be maintained above 9.5V for normal operation.24V represents the maximal supply voltage (Vsup).
MP7720DP-LF Features
8-DIP (0.300, 7.62mm) package
8 pin count
20W kWh per hour
MP7720DP-LF Applications
There are a lot of Monolithic Power Systems Inc.
MP7720DP-LF audio amplifiers applications.
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
