MP2451DJ-LF-Z Overview
A Cut Tape (CT) package is used in this voltage regulator to optimize performance. Throughout this voltage regulator, there are 6 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. In order to save space, this voltage regulator is packaged in the SOT-23-6 Thin, TSOT-23-6 package. There are 1 outputs on DC DC switching regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. The voltage regulator 12v fits the Surface Mount mounting hole. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~125°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 2MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 3.3V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. This voltage regulator 12v offers maximum design flexibility with an output current of 600mA. Voltage regulators' input voltage is limited to 36V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 12V to meet the operation requirements. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. The maximum output voltage of this regulator voltage is 28.8V.
MP2451DJ-LF-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
MP2451DJ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2451DJ-LF-Z Voltage Regulators applications.
- Drilling machines
- Alternators
- Fire elevators
- Balance equipment
- Sensitive electronic devices
- Mobile phones
- Milling machines
- Large fire protection systems
- Smoke prevention equipment
- Electrical distribution systems
