MP2370DJ-LF-Z Overview
It saves board space with the SOT-23-6 Thin, TSOT-23-6 package. It has 1 outputs for LED drivers.As a mounting method, Surface Mount is used.The system emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Frequency 1.4MHz is the basis of operation.A termination of 6 is used to operate the LED driver.A configuration of this chip is made up of 6 pins.It is possible that failures will occur if the voltage supply is below 4.5V.It consists of 3 segments.It's mounted in Surface Mount.It's acceptable for the voltage to be 24V.It produces a voltage of 15V volts.A total of 6 pins are present on this device.When using the device, there is a voltage of 12V volts assigned to the circuit.Input voltages higher than or equal to 4.5V make its operation much more convenient.
MP2370DJ-LF-Z Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.4MHz
MP2370DJ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2370DJ-LF-Z LED Driver ICs applications.
- Refrigeration lighting
- Gallery lighting
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage Lighting and Signage
- Panel lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- LED Lightings for Inspection Devices
